Installing Or Replacing Sata Drives - D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

A.3

Installing or Replacing SATA Drives

A.3.1 Drive and Tray Removal
A drive/tray assembly can be removed by pressing upwards on the green latch found on the
tray and removing it with the handle as shown in Figure A-7 and Figure A-8.
34 Appendix A Replacing and Upgrading FRUs
Removal of a populated drive/tray assembly can have unforeseen effects
including the loss of all data in a volume. A drive can be part of a volume
that may or may not be redundant. Before removing a drive from an
operating xStack Storage Array, make sure it is the correct one.
Figure A-7 Drive and Tray Removal
Figure A-8 Remove Drive/Tray