Advertisement
Management Computer Requirements:
• Windows
• Two (2) Ethernet Adapters*
• Internet Explorer version 5.0 or higher
• Java
Runtime Environment (JRE) Version 1.4.2_08
™
* One Ethernet adapter should be attached to the Internet in order to
automatically download Java version 1.4.2_08. The second Ethernet
adapter will be set to IP address 192.168.1.2. This will allow access to the
DSN-3000 series management port whick is pre-configured at 192.168.1.1.
The diagrams on pages 8 and 9 provide a visual overview of the final
configuration for the DSN-3200 and DSN-3400 respectively.
Note: The management port is not auto-MDI/MDX. You will need a
crossover cable if connecting directly to your computer.
File Server Requirements:
• Windows
• Two (2) Ethernet Adapters
• One adapter must be 1GbE and set to IP address
192.168.2.2.
• The other adapter should be set to an IP address on
the same subnet as your LAN.
• Microsoft iSCSI initiator version 2.0 or higher (can be downloaded
from Microsoft's website).
* One Ethernet adapter should be assigned 192.168.2.2 and connected to
the switch that supports the new SAN device, which is configured with an
IP address of 192.168.2.1.
The second Ethernet adapter will be used by the server to access your local
network (LAN). The diagrams on pages 8 and 9 provide a visual overview
of the final configuration for the DSN-3200 and DSN-3400 respectively.
D-Link DSN-3200/3400 Installation Guide
System Requirements
XP or 2000
™
XP or 2003
™
3
Advertisement
