Technical Specifications - D-Link DSN-2100-10 - xStack Storage Area Network Array Hard Drive Datasheet
Datasheet
Hide thumbs
Also See for DSN-2100-10 - xStack Storage Area Network Array Hard Drive:
- User manual (166 pages) ,
- Hardware reference manual (36 pages) ,
- Software user's manual (158 pages)
Advertisement
Technical Specifications
Features
Drive Bays
Drive Interface Support
System Memory
Cache Memory
Battery Backup for Cache
Bandwidth
Storage Capacity
Operating Systems Supported
Please see support.dlink.com for latest
support information
Supported NICs, iSCSI Accelerators
and iSCSI HBAs
Please see support.dlink.com for latest
support information
iSCSI Network Interface
iSCSI Network Interface
Host Interface
Connections
CHAP Authentication
Access Control of Management
iSCSI/TCP/IP Full HW Offload
Jumbo Frames Support
Link Aggregation Group Support
VLAN Support
Flow Control
b u s i n e s s
• 8
• SATA-II Support
• 512MB standard
• 512MB standard
• Standard (approximately 72 hours on full charge)
• Up to 425MB/s
• 16TB Capacity with 2TB Hard Drives
• Windows Vista® 32-bit & x64 (Ultimate & Enterprise) with Built-in iSCSI initiator
• Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later
• Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator
• Windows XP Pro® 32 & 64-bit with v2.07 iSCSI initiator or later
• Windows 2000 Advanced Server – No MS iSCSI Initiator support, Qlogic HBA only
• Red Hat® 7.3
• Red Hat Enterprise AS update 5 (64-bit)
• Red Hat Enterprise 5 update 2 (64-bit)
• SuSE® Professional 9.3 32-bit
• SuSE Enterprise Server 10.2 32-bit
• Sun Solaris® 10 build 6/06
• IBM AIX 5L
• Microsoft Hyper-V
• VMWare ESX Server® 3.02 & 3.5
• VMWare ESX Server 4.0
• Virtual Iron v4.2
• Citrix XenServer® v4
• Mac OS X® (10.4 & 10.5)
• Intel® Pro 1000MT & XT [1GbE]
• Intel Pro 10000 CX4 [10GbE]
• Myricom 10G-PCIE-8A-C+E [10GbE]
• Chelsio® S310X-SR-XFP [10GbE]
• Neterion® Xframe® II & Xframe E [10GbE]
• Alacritech® SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
• Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
• QLogic® 4010C, 4052C, & 4062C
• Four 1GbE Copper Ports
• iSCSI Draft 20 compliant initiator
• 1,024 hosts
• Yes
• Yes
• Yes
• Yes
• Yes – Up to four LAGs (Static LAG)
• Up to eight 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All
physical ports in LAG belong to same VLAN (IEEE802.1Q Tag)
• Enabled by default
D SN -2100- 10
i SC SI SAN Ar ray
Advertisement
