Volume & RAID Support
RAID Controller
RAID Support
Volumes
Target Nodes
Online Capacity Expansion
Hot Swappable Drives
Instant Volume Access
Free Space Defragmentation
Auto-Detection Failed Drive
Auto-Rebuild Spare Drive
RAID Level Migration
Drive Roaming in Power Off
(configured drives are not
bay-specific)
Micro Rebuilds
Storage Management
Embedded IP-based Management
GUI
Firmware Field Upgradeable
SMI-S Version 1.1
Event Log
Power
Supply Type
Input Voltage
Input Frequency
Input Current
Power Factor Correction
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Physical
(approximate)
Form Factor
Dimesnsions (D x W x H)
Weight
b u s i n e s s
• Intergrated in ASIC chip
• RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets)
• 1,024 Virtual Volumes (256 accessible per initiator)
• 1,024
• Yes
• Yes
• Yes
• Yes
• Yes
• Yes
• Yes
• Yes
• Yes
• Create, manage, expand and monitor storage pool, volumes, and RAID
• Event manager to view and persist events
•
Yes
•
Yes
•
Yes
• 200 Watt
• 100-240 VAC
• 50-60Hz
• 4A
• 95%@110V, Full load
• 32° to 104°F (0° to 40°C)
• -4° to 158°F (-20° to 70°C)
• 20% ~ 90% (Non-condensing)
• 10% ~ 95% (Non-condensing)
• Tower
•
10.7in x 6.6in x 10.2in (273mm x 167mm x 259mm)
•
8.8 lbs (4.0 kg)
D SN- 1100- 10
i SC SI SAN Ar ray
Need help?
Do you have a question about the DSN-1100-10 - xStack Storage Area Network Array Hard Drive and is the answer not in the manual?
Questions and answers