Sharp Aquos LC-15S5U Operation Manual page 28

Useful Features (Continued)
aaaa
Repeat steps 1 to 3 of Setting V-CHIP on page 27,
then "INPUT SECRET NO." will be displayed.
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
VOL (+) CH (A)
MENU
• Changing V-CHIP BLOCK settings
• Changing or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
Upper control panel of the main unit
Repeat steps 1 to 4 of Setting V-CHIP on page 27.
AV MODE DISPLAY
o
<dIRt.
0
MENU8
8
REON
;u
Press MENU to exit.
I
NOTE
>
• If "STATUS" is set to "OFF", V-CHIP BLOCK will not be
activated.
• Activating V-CHIP BLOCK
• Setting STATUS
You can activate V-CHIP BLOCK after setting V-CHIP.
• Canceling the V-CHIP BLOCK screen while
V-CHIP BLOCK is activated
"V-CHIP HAS BEEN ACTIVATED" appears if you watch
a program with the same Program Rating data you
configured.
V-CHIP HAS BEEN ACTIVATED
T V- 1 4
DLSV
I
NOTE
>
• "V-CHIP HAS BEEN ACTIVATED" will not be displayed if
"STATUS" is set to "OFF".
Press MENU to display "INPUT SECRET NO.".
Input the 4-digit secret number by using Channel
Select; V-CHIP BLOCK is temporarily canceled. If
you input an incorrect secret number, "SECRET NO.
IS INCORRECT." is displayed. In this case, input the
correct secret number.
Repeat steps 1 to 3 of Setting V-CHIP on page 27,
or 1 and 2 of Canceling the V-CHIP BLOCK screen
while V-CHIP BLOCK is activated, then "INPUT
SECRET NO." will be displayed.
Press and hold both CH (A) and VOL (+) on the main
unit simultaneously until the message "INPUT SECRET
NO." blinks.
Press MENU to exit.
@
27