Sharp Aquos LC-15S5U Operation Manual page 16

Basic Operation
INPUT1 mode
INPUT1
I
480P
INPUT31
INPUT21
TV mode
INPUT2 mode
INPUT3 mode
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3
and TV mode each time INPUT is pressed.
Turn on the power of the connected video equipment.
\ \
MU~
VOL CH INM
II
\ \
~~E§:§f
II
POWER
POWER indicator
I
NOTE
>
• The on-screen display disappears in a few seconds.
• Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
On-screen display
I~
STEREO
SAP
MONO
• To turn off the main power,
pr~ss
POWER again.
CD®0
0CD®
I
NOTE
>
INPUT1:
Used for video equipment connected to the COMPONENT
input terminals.
INPUT2:
Used for video equipment connected to the IN PUT2
terminals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority.
INPUT3/0UTPUT:
INPUT3 mode is used to adjust the preset settings and IN
or OUT can be selected. INPUT3 indication is not displayed
when OUT is selected.
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn the LCD TV set back on
Press POWER again. The POWER indicator will turn green.
@
15