Install Channels; Autoprogram; Return Your Settings To Default Values; Troubleshooting - Philips 40PFL4706 User Manual

6 Install channels

Autoprogram

If you switch wires (e.g., between antenna and CATV) or if you
move the unit to a different area after the initial setting, you
will need to perform autoprogram.
1
Press MENU on the remote control and then use
Î/ï/Í /Æ to select [Setup] > [Installation] > [Channels]
> [Autoprogram] > [Start now].
System searching. Please wait...
Digital channels found:
Analog channels found:
Auto programming may take more than
20 minutes to complete.
Stop
2
Press OK to start the installation.
If you run [Autoprogram] when you have locked
channels, a message appears asking to enter your PIN .
Enter your PIN in order to complete the installation.
• When autoprogramming is complete, the lowest
memorized channel will be displayed.
3
Follow the on-screen instructions to complete the
installation.

Return your settings to default values

When you return picture and sound settings to their default
values the channel installation settings are not affected.
1
Press MENU on the remote control and then use
Î/ï/Í /Æ to select [Setup] > [Installation] > [Reset AV
settings] > [Start now].
2
Press OK to reset the picture and sound settings.
3
Press MENU to exit.
16 EN
0
0

7 Troubleshooting

Downloading an electronic copy

To obtain a more elaborate and complete electronic copy of
this manual :
1
Point your browser to www.philips.com/support
2
Choose your country of location.
3
Enter the model number or a keyword in the " Find your
product " fi eld. Alternatively, you can browse the catalog.
4
Click the description or model.
5
Under Product support, click " User manuals ".

Contact us

If you cannot resolve your problem, refer to the FAQ for this
TV at www.philips.com/support
If the problem remains unresolved, contact the Customer
Support Center in your country.
Warning
•
Do not attempt to repair the TV yourself. This may cause severe injury,
irreparable damage to your TV or void your warranty.
Note
•
Please have available your TV model and serial number before contacting us.
These numbers are available on the back and side of your TV, as well as on
the packaging.