Panasonic TH32LRU20 - HOSPITALITY LCD HDTV Operating Instructions Manual page 21

(Continued)
Menu list
Menu Item
Timer
Sleep
Lock
Closed caption
ANT/Cable setup
Input labels
Audio out
Power save
No signal for 10
minutes
No activity for 3
hours
Image viewer
auto play
About
Reset to defaults
Adjustments/Configurations (alternatives)
The TV can automatically turn Off at the designated time (0/15/30/60/90)
Locks the programs. (p. 22)
Displays subtitles (Closed caption). (p. 26)
Sets channels. (p. 24)
Selects the terminal and label of the external equipment (p. 27)
To prevent howling, stops output of audio specified in this menu. (p. 27) (On/Off)
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
room. (Standard/Saving)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
•
Not in use when "Lock" is set, or while "SD mode" or "Digital Channel" is selected.
•
"No signal for 10 minutes was activated" will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by "No signal for 10
minutes".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
•
Not in use while "PC input" is selected.
•
"No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Set "Thumbnail" to play back SD cards automatically.
(Thumbnail/Off)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings.
21