Hotel Mode Setup; Hotel Mode Menu - Panasonic TH32LRU20 - HOSPITALITY LCD HDTV Operating Instructions Manual

Hotel Mode Setup

Operating restrictions can be set by setting the operating mode or initial settings in the "Hotel Mode".

Hotel Mode menu

Item
Mode
TA Ctrl
Initial input
Initial channel
Initial volume
Max. volume
OSD Ctrl
Button lock
Power ctrl
Remote
CC reset
Lock reset
18
Display "Hotel Mode"
Press MENU, G, Y and 0 remote button.
Hotel Mode
Save
Mode
TA Ctrl
Initial input
Initial channel
Initial volume
Max. volume
OSD Ctrl
Select "Save" then press OK
Complete Hotel Mode setup
Hotel Mode
Save
Mode
TA Ctrl
Initial input
Sets operation mode Hotel mode(Guest mode) or Setup mode. (On/Off)
These settings are enabled even after the AC is switched off and on again.
On: These menu restrictions are enabled. Communication can be performed with TA (Online), and the
"Guest menu" is displayed. (Guest mode)
Off: These menu restrictions are disabled. Communication with TA cannot be performed, and the "Setup
menu" is displayed. (Setup mode)
Sets TA (Terminal Adaptor) status. (Internal/External/Off)
Internal: Use Internal TA External: Use External TA
Selects Input when the TV is turned on.
(-/RF/HDMI 1-3/Component/Video1-2/PC)
Sets the channel at power-on.
Sets the volume level at power-on. (0-100)
Sets the maximum volume level. (0-100)
Limits the OSD display. (Off/Pattern1)
Pattern 1: "Recall" and "Shut-off notification" messages are not displayed at power-on.
Also displayed when "Pattern 1" is specified as the display command from TA.
Limits the TV panel button operation. (Off/All/Pattern1)
Pattern
1: Only INPUT and POWER buttons are available.
All: All buttons are not available.
Sets the screen condition when the AC power is switched on. (Off/On)
Off: Starts up in last screen.
ON: Starts up in screen On.
Switches Operation guide according to remote control. (Panasonic/Others)
Sets CC setting status. (Off/On)
Off: Saves the last settings.
Sets Lock setting status. (Off/On)
Off: Saves the last settings.
1/2
Hotel Mode
Button lock
On
Power ctrl
Internal Remote
HDMI 1 CC reset
101-1 Lock reset
10
25
Off
1/2
On
Internal
HDMI 1
Adjustments/Configurations (alternatives)
Does not operate when input from TA* to the TV is prohibited.
Does not operate when control from TA to the TV is prohibited.
On: Resets all CC settings to defaults.
On: Resets all Lock settings to defaults.
2/2
Pattern 1
On
Panasonic
Off
Off
* TA: Terminal Adapter
select
Adjust
select
ok