LG 26LC7DC - - 26" LCD TV Owner's Manual page 86

01. Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k] [a][] [Set ID][] [Data] [Cr]
Data 0 : Power Off Data 1 : Power On
Acknowledgement [a] [] [set ID] [] [OK/NG] [Data] [x]
* In a like manner, if other functions transmit 'FF data
based on this format, Acknowledgement data feedback
presents status about each function.
* In this model, TV will send the Acknowledge after
power on processing completion.
* There might be a time delay between command and
acknowledgement.
02. Input Select (Command: k b) (Main Picture Input)
To select input source for the TV.
Transmission [k] [b][] [Set ID][ ] [Data] [cr]
Data 0: DTV
Data 1 : Analog
Data 2:AV1
Data 3:AV2
Data 4: Component 1
Data 5: Component 2
Data 7: RGB-PC
Data 8: HDMll/DVl
Data 9:HDMI2
Acknowledgement[b][ ][set ID][ ][OKiNG] [Data] [x]
03. Aspect Ratio (Command: k c) (Main picture format)
To adjust the screen format.
You can also adjust the screen format using the RATIO
button on remote control or in the Option menu.
TransmissiOn [k] [C][ ][Set ID][ ][Data] [Cr]
Date 1 : 4:3 5: Zoom 2
2:16:9 6: Set by program
3: Horizon
4: Zoom 1
Acknowledgement [c] [ ] [Set ID] [ ] [OK/NG] [Data] [x]
04. Screen Mute (Command: k d)
To select screen mute on/off.
Transmission [k] [d][] [Set iD][] [Data] [cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
ACknoWledgement [d][ ] [Set ID] [ ] [OK/NG] [Data] [x]
05. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control
TransmiSsiOn [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
Acknowiedgemen[ [e][ ][Set ID][ ][OK/NG] [Data] [x]
06.
Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission[k] [f] [] [Set ID][] [Data] [Cr]
Data Min : 0 - Max : 64 (_transmit by Hexadecimal code)
Refer to 'Real data mapping' as shown below.
A&nowledgement[f] [] [Set ID][] [OK/NG] [Data] [x]
07.
Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the Video menu.
TransmissiOn [k] [g] [] [Set ID] [ ] [Data] [Cr]
Data Min : 0 - Max : 64 (*transmit by Hexadecimal code)
Refer to 'Real data mapping' as shown below.
Acknowiedgemen_ [g][ ][Set ID][ ][OK/NG] [Data] [x]
08.
Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission [k] [h] [] [Set ID] [] [Data] [Cr]
Data Min : 0 - Max : 64 (*transmit by Hexadecimal code)
Refer to 'Real data mapping' as shown below.
Acknowledgement[h] [] [set ID] [] [OK/NG] [Data] [x]
09.
Color (Command: k i)
To adjust the screen color.
You can also adjust color in the Video menu.
Transmission [k] [i] [ ] [set ID] [ ] [Data] [Cr]
Data Min : 0 _ Max : 64 (*transmit by Hexadecimal code)
Refer to 'Real data mapping' as shown below.
Acknowledgement[i][] [Set ID][] [OK/NG] [Data] [x]
*Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
* Tint : R50 - G50
* Balance : L50 - R50
II1
Z
X
85