Testing Your Printer - Oki ML186 User Manual

Testing Your Printer

Self Test (Font Samples)
Your printer has a built-in test (self test) to make sure that it is set
up and working correctly.
1. Load continuous forms paper into the printer (see page 14, ff.).
2. Make sure the printer is turned off, then press and hold
while turning the printer on.
FEED
The test print begins.
3. To stop the test, press
The top of each test printout contains information
about your printer. Be sure to have a copy of the
printout handy if you have to call for service.
or turn the printer off.
SELECT
Note
62
• Maintenance
LINE