At the end of the wash cycle...
When the buzzer constantly beeps six times, the "End" light will turn on and the cycle has finished. Turn off
the appliance using the Power button, turn off the water supply and open the door of the dishwasher.
Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while
they are still hot and more susceptible to breakage. They will also dry better.
Cancelling or modifying a wash cycle setting...
A cycle that is underway can only be modified if it has been running for a short time. Otherwise, the
detergent may have already been used, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled (see the paragraph entitled, "Loading the
Detergent").
Rotate the knob to the mark of "Reset" then select
right programme.
13