Configuring The Printer Driver For The Options Installed On The Machine - Sharp PN-L602B Software Setup Manual

CONFIGURING THE PRINTER DRIVER FOR THE
OPTIONS INSTALLED ON THE MACHINE
After installing the printer driver, you must configure the printer driver settings appropriately for the options that have
been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer
driver.
If the PPD driver is installed, see "When the PPD driver is installed" (page 25).
When the PCL printer driver, Sharp Advanced Printing Language-c
printer driver or PS printer driver is installed
1
Click the [Start] button (
[Control Panel], and then click [Printer].
• In Windows XP/Server 2003, click the [start] button
and then click [Printers and Faxes].
• In Windows 2000, click the [Start] button, select
[Settings], and then click [Printers].
If [Printers and Faxes] does not appear in the [start]
menu in Windows XP, click the [start] button, click
[Control Panel], click [Printers and Other Hardware],
and then click [Printers and Faxes].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the
machine.
(2) Select [Properties].
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
3
), click
4
Click the [Configuration] tab.
Click the [Auto Configuration] button.
The settings are automatically configured based on the
detected machine status.
* The screen is that of PCL6 printer driver.
The message "Set Tandem Print" is not
displayed in case of Sharp Advanced Printing
Language-c printer driver.
If the machine is being used on an IPv6 network, you
must configure the options manually as explained in "If
automatic configuration fails" (page 24).
23