Battery Installation
1.
Slide the outdoor temperature transmitter from the bracket as illustrated.
2.
Reverse the outdoor temperature transmitter.
3.
Remove the battery cover.
4.
Observe the correct polarity (+/-) and install 2 x AAA batteries. Make sure the batteries
are fi rmly set inside the transmitter or start-up problems may occur. Replace the battery cover.
5.
Insert the transmitter into the bracket.
Outdoor Remote Temperature Transmitter Mounting
The outdoor remote temperature sensor can be hung onto a wall using a screw.
Note:
1) The remote temperature transmitter should be placed in a dry, shaded area.
The remote temperature sensor has a range of 80 feet (25m). Any walls the signal
will have to pass through will reduce the range. An outdoor wall or window will have
up to 10 feet of resistance. Your distance plus resistance should not exceed 80 feet in a straight line.
2) Fog and mist will not harm your remote temperature sensor but direct rain MUST be avoided.
Weather Center Features:
1.
Indoor Temperature Display
2.
Indoor Humidity Display
3.
Outdoor Temperature Display
4.
Weather Forecast
5.
Celsius(°C) and Fahrenheit (°F) Switching Display
Using The Weather Center