Using The Su-2 Image Viewer For The First Time - Nokia SU-2 - Image Viewer - Digital AV Player User Manual

■ Using the SU-2 Image Viewer for the first time

1. Press the release buttons on both
sides of the SU-2 Image Viewer to
lift the cover up.
Check that the NTSC/PAL switch
is in the correct position and that
it corresponds to the TV standard
used in your country.
2. Connect the SU-2 Image Viewer
to the RCA connector on your TV.
If your TV does not have a RCA
connector, you need a RCA/SCART adapter, which you can obtain from a
hardware shop.
3. Switch on the SU-2 Image Viewer. The Nokia logo appears on your TV screen.
4. Make sure that your phone is switched on. Then, enter your phone's Bluetooth
menu and activate the Bluetooth connection.
5. Enter the submenu where you can set the phone to search for Bluetooth
devices, and start the search. The phone searches for all Bluetooth devices
within about 10 meters and shows them in a list.
6. Select SU-2 from the list.
©
Copyright 2003 Nokia. All rights reserved.
9