Epson P-2000 - Multimedia Storage Viewer Product Support Bulletin page 13

Steps:
1. Install a blank memory card into a Memory Card Reader/Writer and copy the "PSVFIRM1"
folder (including all the files in the folder) to the root directory of your memory card.
2. Verify that the battery is installed in the P-2000
3. Connect the AC adapter to the P-2000, but do not power on the unit.
4. After the firmware file has been downloaded to your memory card, insert the CompactFlash
or sD memory card into the P-2000 as shown below.
5. Press and hold down the "OK" button while sliding the "POWER" switch as shown below.
Page 3 of 5
PSB.2005.06.002R2