Table of Contents
Advertisement
Functions (
)
OIS (Optical image Stabilization)
This feature allows you to minimize camera shake while taking a
picture.
- [OIS] Sub menus: [Off], [On]
OIS function may not work suffi ciently in the following cases.
- To take pictures of a moving subject.
- To take pictures with higher digital zoom values.
- When camera shake is beyond the camera-shake correction range.
- When the shutter speed is slow.
When you use the OIS function after mounting your camera on a
tripod, the vibration of the OIS sensor may cause image shake. In
this case, it is recommended to turn the OIS function off.
When you capture an image after shock is given to the camera, the
LCD screen may shake. In this case, turn the camera off and then
on for proper operation.
When the battery is too low (
When the shooting speed exceeds 1 second, the timer function is
selected or the battery is low, the OIS icon will turn gray and the
OIS function will not work.
46
OIS
Back
Move
), the OIS function will not work.
Voice Memo
You can add your voice-over to a stored
still image. (Max. 10 sec.)
- If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
- Press the shutter button and take a
picture. The picture is stored on the
memory card.
- Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the shutter button
will stop the voice memo.
Memo
Back
Move
Stop
Advertisement
Table of Contents
