Self-Timer / Right Button; Menu / Ok Button - Samsung CJ050501C User Manual

Self-timer (
■ When the menu is displayed on the LCD monitor, pressing the Right button
makes the cursor shift to the right tab.
■ When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer (
photographer would also like to be in the image.
● Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING
mode with the exception of VOICE RECORDING
mode.
2. Press the SELF-TIMER button until the desired
mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon
appears on the LCD monitor. In Movie Clip mode,
only the 10-second self-timer will work.
•2SEC self-timer (
)
: Pressing the shutter button will allow an
interval of 2 seconds before the image is
taken.
•10SEC self-timer (
)
: Pressing the shutter button will allow an
interval of 10 seconds before the image is taken.
•Double self-timer (
)
: A picture will be taken after about 10 seconds and 2 seconds later a
second picture will be taken. When using the flash, the 2-second self-timer
may be delayed for longer than 2 seconds depending on the flash charge
time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.
《28》
) / Right button
) button. This function is used when the
[ Selecting the 2 SEC self-timer ]
INFORMATION
● If you operate the Self-timer and Play mode button during the self-timer
operation, the self-timer function is cancelled.
● Use a tripod to prevent the camera from shaking.
● In Movie Clip mode, only the 10SEC self-timer will work.

MENU / OK button

■ MENU button
- When you press the MENU button, a menu related to each camera mode will
be displayed on the LCD monitor. Pressing it again will return the LCD to the
initial display.
- A menu option can be displayed for MOVIE CLIP and STILL IMAGE.
There is no menu available when the VOICE RECORDING mode is selected.
[ Menu off ]
■ OK button
- When the menu is displayed on the LCD monitor, this button is used for shifting
the cursor to the sub menu or for confirming data.
Recording
Sharpness Normal
Contrast Normal
Auto Focus Center AF
OSD Info Full
Pressing the
MENU button
MEMU Exit Move
[ Menu on ]