Polaroid X530 User Manual page 79

For Windows® and Macintosh Users:
Symptom
I cannot activate my
digital camera by
pressing the button.
Camera suddenly
powers off.
Image is not recorded
when the Shutter button
is pressed.
Camera powers off duing
self-timer countdown.
LCD screen image is out
of focus.
AVI file cannot be played.
The camera is detected by
the Windows and works
properly. But a drive letter
of the Removable Disk is
not created.
ArcSoft PhotoStudio can
not automatically detect
or view the X3F file.
There is no response
from the camera while
pressing any buttons.
Polaroid x530 Digital Camera User Guide
www.polaroid-digital.com
Problem
Insufficient battery power or
battery is missing.
Battery door is not closed.
Auto Power Off function is
activated.
Or
The battery is exhausted.
Camera is turned off.
Or
Flash unit is charging.
Or
Memory is full.
The battery is exhausted.
mode or mode is used
for landscape.
Or
Normal focus is being used
for macro images.
DirectX version is lower
than 9.0
The removable disk crashes
with the network drives.
ArcSoft PhotoStudio does not
support the X3F file format.
The LCD screen is frozen or
the camera is hanged.
Solution
Recharge your battery or place your
battery into the camera.
Make sure the battery door is
securely closed.
Turn the camera on.
Or
Recharge your battery.
Turn the camera on.
Or
Wait until flash unit charging finishes.
Or
Delete images you no longer need,
or use another memory card.
Recharge your battery.
Select a correct scene shooting
mode for taking pictures.
Install DirectX 9.0 or above. Visit
http://www.microsoft.com/directx
for more details.
Disconnect the crashed network
drive and reserve this drive letter
for the camera.
Use the Polaroid PhotoLab to
convert the X3F file to the JPEG
or TIFF format. Then ArcSoft
PhotoStudio can open the file in
JPEG or TIFF format.
Remove and re-install the battery or
batteries to reset the camera. Your
valuable data stored in the camera
will not be lost.
PC Mac
79