Back view...5 1.4.7 Adjusting the LCD display...6 1.4.8 About the LEDs...11 Getting started... 12 Inserting an SD card ...12 Inserting the batteries...14 Charging the battery ...16 Turning on/ off the camcorder...16 Changing modes...16 Before you start ...17 Table of Contents...
Page 4
Connecting to a computer ...25 2.10 Connecting to a standard TV ...25 2.11 Connecting to a HDTV ...26 Using the camcorder ... 27 Camcorder and voice recorder mode ...27 3.1.1 Camcorder and voice recorder mode...27 3.1.2 Using the macro function ...29 3.1.3...
Page 5
3.2.5 Using the flash module, auto and force 32 3.2.6 Quick access controls ...32 Camcorder Playback mode...33 3.3.1 Camcorder Playback mode icons ...33 Camera Playback mode...36 3.4.1 Camera Playback mode icons ...36 Thumbnail mode ...38 Using the menus ... 39 Camcorder menu ...39...
Page 6
Camera playback menu...53 4.4.1 Delete...53 4.4.2 Protect ...55 4.4.3 Slide show...56 4.4.4 DPOF ...57 System menu...58 4.5.1 Setting the beep...58 4.5.2 Histogram Mode...58 4.5.3 Auto power off...59 4.5.4 TV standard...60 4.5.5 Format ...61 4.5.6 Default...62 4.5.7 Language ...62 4.5.8 Frequency ...63 4.5.9 Date/time ...63 Installing the software and drivers...
Preface Congratulations on your purchase of this advanced camcorder. Ensure that you read this manual carefully and keep it in a safe place for future reference. About this manual Every effort has been made to ensure that the contents of this manual are correct and up to date.
Precautions General precautions • Do not use or store the product in dusty, dirty, or sandy areas, as its components may be damaged. • Do not store the product in a hot environment. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
Notes on the LCD Screen Caution must be observed when dealing with the fluid contained in the LCD. Ensure that fluid does not leak if the screen becomes cracked or damaged. If this occurs, follow these steps: • If the fluid makes contact with skin, wipe it with a clean cloth then rinse with a large amount of water.
• Remove the battery to avoid the fluid leakage if the camera is not going to be used for a long time. • If the battery is crushed or damaged, remove it immediately to avoid the battery fluid leakage and abnormal expansion. •...
A USB 1.1 port may enable you to transfer files to and from your host PC, but transfer speeds may be much faster with a USB 2.0 port. 1.2 Features The camcorder offers a variety of features and functions including: • HD Digital camcorder •...
1.3 Unpacking the camcorder The following items should be present in the package. If any item is missing or appears damaged, contact your dealer immediately. Camcorder Pouch User manual Component video Battery charger AV cable USB cable cable Power cord...
1.4 About the camcorder Refer to the following illustrations to familiarize yourself with the buttons and controls of this camcorder. 1.4.1 Front view LED flash light Self-timer LED 1.4.2 Top view Battery cover latch Lens Flash module Shutter button Zoom/ Volume button...
1.4.5 Left view Hand strap 1.4.6 Back view REC. / Power LED Camera Status LED Joystick HD Output USB/ AV Output Battery cover Speaker Mode dial REC.STOP button...
1.4.7 Adjusting the LCD display Flip and twist the LCD screen as shown while capturing a still image or recording a video clip.
Page 17
Joystick Function Press and hold to turn power on/off. Press to display main OSD menus. Use to turn Camcorder, Camera, and SET modes. In Camcorder mode, press the REC.STOP button to start and stop recording. In Camcorder Playback mode, press the REC.STOP to pause/restart playing.
Page 18
In Camcorder Playback mode: 1. Press up and down to view the stored video clips and press the center joystick button to play/ stop the video clips.
Page 19
In Camera mode, press to take a photo. Shutter In Camcorder mode, you can also button press to take a photo before recording a video clip. Playback In Camcorder and Camera mode, press button to enter playback mode. Display Press once to turn off all OSD icons and button press again to display all OSD icons off.
Page 20
SD card Slide the latch to open the SD card cover latch cover when you insert the SD card.
1.4.8 About the LEDs The following table describes the camera LEDs: Color Power / Green Rec. Green Blinking Camera Status Red Blinking Red Blinking Rapidly Self-timer Red Blinking Red Blinking Rapidly Definition Power-on Recording Camera busy Self-timer is activated and flash in charge. 2 seconds self-timer remaining.
2 Getting started Read this section to learn how to start using the camcorder. This section covers basic functions such as switching on, inserting the battery and memory cards, and configuring preliminary settings. See later chapters for advanced functions. Inserting an SD Card An SD card can be installed in the camcorder to provide additional storage space for still images, video clips, or other files.
2.2 Inserting the batteries This camcorder is designed to use a rechargeable Li-ion battery. Only use the battery supplied or similar batteries recommended by the manufacturer or your dealer. Note: Install the battery exactly as described here. Installing the battery incorrectly could cause damage to the camcorder and possibly start a fire.
2.4 Turning on/ off the camcorder Press and hold the power button to turn the camcorder on/off. 2.5 Changing modes The camcorder can operate in three modes, , Camera, and SET. Move the mode dial Camcorder to toggle different modes.
2.6 Before you start Before you start using the camcorder, some basic settings such as date and time, languages and beep function need to be configured. 2.6.1 Setting the date and time Turn on the camcorder, and move the mode dial to SET.
2.6.2 Setting the language Turn on the camcorder, and move the mode dial to SET. Move the joystick up and down to highlight Language. Press the center joystick button to select it. Move the joystick left and right to select the following...
2.6.3 Setting the beep Turn on the camcorder, and move the mode dial to SET. Move the joystick up and down to highlight Beep. Press the center joystick button to select it. Move the joystick left and right to select X (Beep Off) or √...
2.7 Shoot/Playback video 2.7.1 Shooting a video clip Turn on the camcorder and move the mode dial to mode. Camcorder Camcorder mode Use the LCD screen to frame the video. Press the REC.STOP button to start recording. Press the REC.STOP button again to stop recording.
Page 31
3. The LCD preview and the ratio of a still-image capture can vary depending on the different video resolution settings. See the following table: Video resolution Preview WVGA 720P 1080P 4:3 ratio QVGA Taking pictures and focusing 16:9 ratio 4:3 ratio 4:3 ratio...
2.7.2 Playing the video clip Camcorder recent file displays on the LCD screen. Camcorder playback mode indicator Move the joystick right and left to select a desired video clip and press the center joystick button. The video clip starts playing.
2.8 Taking/viewing pictures 2.8.1 Taking a still picture Turn on the camcorder and move the Mode Dial to Camera mode. Camera mode Use the LCD screen to frame the picture. Press the Shutter button to capture the image. The picture is automatically saved with a unique file...
2.8.2 Viewing images In Camera mode, press the Playback button. The most recent image displays on the LCD screen. Camera Playback mode Press the joystick right and left to scroll through the images. Move the Zoom button right to zoom in the picture. There are two direction keys appears on the LCD screen.
Read this section to learn how to transfer files to a PC, show the video clips or photos on a TV. Connect the camcorder to a computer with the USB cable provided. 2.10 Connecting to a standard TV Connect the camcorder to a standard TV as shown with the AV cable provided.
Read this section to learn how to show the video clips or photos on a HDTV. Connecting to a HDTV offers the high resolution for displaying the video clips or photos. Connect the camcorder to a HD TV as shown with the component video cable and AV cable provided. AV out...
3 Using the camcorder Read this section to learn how to use the camcorder. 3.1 Camcorder and voice recorder mode Use this mode to capture video clips or record voice and store them on an SD card. 3.1.1 Camcorder and voice recorder mode Use the following picture to familiarize yourself with the Camcorder and voice recorder mode icons and symbols.
Page 38
: No SD card : SD card in Remaining recording time indicator Force and auto flash indicator Resolution indicator Battery indicator Histogram indicator LED flash light indicator Macro indicator Camcorder mode indicator Zoom indicator Memory status indicator : SD card in...
Move the joystick again to return to normal mode. 3.1.3 Using the zoom function The camcorder is equipped with 5x optical zoom and 4X digital zoom. Move the Zoom button right to get closer to a subject. Move the Zoom button left to move away from a subject.
You can also make adjustments to exposure by pressing the joystick up and down. In Camcorder and Camera modes, press the joystick up and down to adjust the EV compensation settings. Press the joystick left to choose white balance settings.
3.2 Camera mode Use Camera mode to capture still pictures and store them in the on an SD card. 3.2.1 Camera mode icons Use the following picture to familiarize yourself with the Camera mode icons and symbols. See the table below for a description of each icon and symbol. Remaining number of photos EV compensation indicator Effect indicator...
3.2.2 Using the macro function See section 3.1.2 “Using the macro function”. 3.2.3 Using the zoom function See section 3.1.3“Using the zoom function”. 3.2.4 Using the LED flash module See section 3.1.4 “Using the LED flash light”. 3.2.5 Using the flash module, auto and force See section 3.1.5 “Using the Flash module, auto and force”.
3.3 Camcorder Playback mode Use Camcorder Playback mode to review all the movie files stored on the SD card. 3.3.1 Camcorder Playback mode icons Refer to the following picture to familiarize yourself with the Camcorder Playback mode icons and symbols.
Page 44
The length of every video clip Play/ Pause indicator Battery status indicator File protect indicator Camcorder playback mode icon Displays the file number of the video clip Displays the number of current audio/ total number of recorded audio clips Volume level...
Page 45
Battery status indicator File protect indicator Voice playback mode Displays the file number of the audio clip...
3.4 Camera Playback mode Use Camera Playback mode to review all the image files stored in the camcorder. 3.4.1 Camera Playback mode icons Refer to the following picture to familiarize yourself with the Camera Playback mode icons and symbols. See the table below for a description of each icon and symbol.
When in Camera Playback or Camcorder Playback modes, press the ZOOM button left to show images as thumbnails. Turn on the camcorder and make sure it is in Camera Playback or Camcorder Playback mode. The most recent image /video clip displays on the screen.
4 Using the menus Read this section to learn how to configure the camcorder settings and use the advanced features. 4.1 Camcorder menu When in Camcorder mode, press the Menu button to show the camcorder options menu. 4.1.1. White balance Use this option to correct color difference for different lighting conditions.
Use the resolution option to determine the resolution of the captured video. The larger screen size requires more memory storage space. Turn the camcorder on and ensure it is in Camcorder mode. Press the Menu button and move the joystick up and down to highlight the Resolution option.
4.1.3. Color effect The camcorder can capture standard color images, black and white images, or sepia tone to give an old-fashioned look. Turn the camcorder on and ensure it is in Camcorder mode. Press the Menu button and move the joystick up and down to highlight the Effect option.
4.1.4. Night mode Use this function to shoot a better video clip quality in dark environments. Turn the camcorder on and ensure it is in Camcorder mode. Press the Menu button and move the joystick up and down to highlight the Night Mode option. Press the center joystick button to display the submenu.
4.1.5. Stabilizer Use this function to reduce vibration caused by camcorder shakes during a video shoot. Turn the camcorder on and ensure it is in Camcorder mode. Press the Menu button and move the joystick up and down to highlight the Stabilizer option. Press the center joystick button to display the submenu.
4.1.6. Capture mode Use this function to record sound or image. Turn the camcorder on and ensure it is in Camcorder mode. Press the Menu button and move the joystick up and down to highlight the Capture Mode option. Press the center joystick button to display the submenu.
4.2.1 Delete Use this function to delete files. Turn the camcorder on and ensure it is in Camcorder mode. Press the Playback button and then press the Menu button to display the Camcorder Playback menu. Move the joystick up and down to select Delete One or Delete All options.
Page 56
If you select Delete All, press the center joystick button to display the submenu. Move the joystick left and right to select X or √ and press the center joystick button to delete. Press the Menu button again to exit the menu. Note: Once deleted, files cannot be recovered so make sure you have a backup before you delete.
4.2.2 Protect Use this function to lock files to prevent accidental deletion. Turn the camcorder on and ensure it is in Camcorder mode. Press the Playback button and then press the Menu button to display Camcorder Playback menu. Move the joystick up and down to select the Protect option.
Use this option to correct color difference due to lighting conditions. Turn the camcorder on and ensure it is in Camera mode. Press the Menu button and move the joystick up and down to highlight the White Balance option. Press the center joystick button to display the submenu.
Use this option to set the size of the captured image. Larger images contain more detail and therefore use more memory space. Turn the camcorder on and ensure it is in Camera mode. Press the Menu button and move the joystick up and down to highlight the Resolution option.
The camcorder can capture standard color images, black and white images, or sepia tone to give an old-fashioned look. Turn the camcorder on and ensure it is in Camera mode. Press the Menu button and move the joystick up and down to highlight the Effect option.
Night mode Use this function to shoot a better video clip quality in dark environments. Turn the camcorder on and ensure it is in Camcorder mode. Press the Menu button and move the joystick up and down to highlight the Night Mode option. Press the center joystick button to display the submenu.
Self timer Use the self timer function to take a photo of yourself. Turn the camcorder on and ensure it is in Camera mode. Press the Menu button and move the joystick up and down to highlight the Selftimer option. Press the center joystick button to display the submenu.
4.4.1 Delete Use this function to delete files. Turn the camcorder on and ensure it is in Camera mode. Press the Playback button and then press the Menu button to display the Camera Playback menu. Move the joystick up and down to select the Delete One or Delete All options.
Page 64
If you select Delete All, press the center joystick button to display the submenu. Move the joystick left and right to select X or √ and then press the center joystick button to delete. Press the Menu button again to exit the menu. Note: Once deleted, files cannot be recovered so make sure you have a backup before you delete.
4.4.2 Protect Use this function to protect files. Turn the camcorder on and ensure it is in Camera mode. Press the Playback button and then press the Menu button to display the Camera Playback menu. Move the joystick up and down to select the Protect option.
The camcorder includes a slide show function, which displays each image in turn with a regular interval between pictures. Turn the camcorder on and ensure it is in Camera mode. Press the Playback button and then press the Menu button to display the Camera Playback menu.
Use the DPOF (Digital Print Order Format) function to tag pictures stored in the memory card with print information. Turn the camcorder on and ensure it is in Camera mode. Press the Playback button and then press the Menu button to display the Camera Playback menu.
Use this function to display a histogram graph on LCD screen. This function can help you to capture a better photo/video clip. Turn on the camcorder and switch to SET mode. Move the joystick up and down to highlight the Histogram option.
4.5.3 Auto power off Use this function to switch the camcorder off automatically after a period of inactivity for power saving. Turn on the camcorder and switch to SET mode. Move the joystick up and down to highlight the Auto Power Off option.
TV standard Use the TV option to set the TV system for the area. Turn on the camcorder and switch to SET mode. Move the joystick up and down to highlight the TV standard option. Press the center joystick button to display the submenu.
Use this function to format the current storage media. This format action will delete everything on the media. Turn on the camcorder and switch to SET mode. Move the joystick up and down to highlight the Format option. Press the center joystick button to display the submenu.
Default Use this option to reset all settings to the default settings. Turn on the camcorder and switch to SET mode. Move the joystick up and down to highlight the Default option. Press the center joystick button to display the submenu.
Use the Frequency option to set the frequency system for your area. To set the frequency: Turn on the camcorder and switch to SET mode. Move the joystick up and down to highlight the Frequency option. Press the center joystick button to display the submenu.
5 Installing the software and drivers Read this section to learn how to install the software for the camera. 5.1 Presto! Video Works Presto! Video Works is an advanced software application for editing video. To install Presto! Video Works: Insert the supplied CD into the CD-ROM drive. If the CD-ROM does not automatically boot, use Windows Explorer to execute the InstallMgr.exe file in the root directory.
5.2 Presto! Mr. Photo Presto! Mr. Photo is an advanced photo editing software application. To install Presto! Mr. Photo: Insert the supplied CD into the CD-ROM drive. If the CD-ROM does not automatically boot, use Windows Explorer to execute the InstallMgr.exe file in the root directory.
5.3 Quick Time Quick Time is an easy-to-use application for playing the video clips stored in the camera or on the SD/MMC card. To install the Quick Time: Insert the supplied CD into the CD-ROM drive. If the CD-Rom doesn’t automatically boot, use Window Explore to execute the InstalMgr.exe file in the root directory.
Appendix Specifications General Imaging 1/2.5” CMOS 5.0 Megapixel sensor sensor 5.0 Megapixel Active pixels Storage media Internal: Built-in 32MB Flash Memory (For System Software Storage) External: SD Card (Up to SDHC 8GB Class6) Sensor Auto sensitivity Color effects Color/B&W/Sepia 5X Optical zoom lens Lens Wide: F/3.2, f=6.26mm Tele: F/6.8, f=30.75mm...
Page 78
Still image Formats: JPEG (DPOF, EXIF) , Resolution: 3MP, 5MP, 8MP (Firmware interpolation) Zoom Camcorder: 5X Optical Zoom, 2X Digital Zoom (1080P), 4X Digital Zoom (others) Camera: 5X optical zoom, 4X digital zoom Still Image Playback: Digital Zoom Max. Audio Video TFT Monitor 3.0”...
Page 79
General White balance Auto/Sunny/Cloudy/Tungsten/ Fluorescent -2.0 EV~+2.0 EV compensation Self-timer Off, 5, 10 seconds PC interface USB 2.0 (high speed) TV out format NTSC/PAL/ Component Output Shutter 1 ~ 1/ 2000 sec. Auto power Off, 1 min., 5 min options. Power supply Li-Ion battery NP-120 battery Dimension 57 (W) x 70 (H) x 129 (D) mm...
Troubleshooting Problem Cannot turn on The batteries are the camcorder. not inserted correctly. The batteries have no power. The camera The auto power off suddenly turns function was off. enabled. The camera is running out of battery power. The captured...
Page 81
The camera The camera is turns off when running out of capturing battery power. image using self-timer. The image is The subject is out of focus. beyond focus range. Memory card The memory cannot be card is protected. used. The memory card contains non-DCF images taken by other...
Page 82
inactive. connecting the camera with other devices. the camera and insert again.
Page 84
Website: Please visit our website at www.dxgusa.com any product updates or special announcements. You can also check out our online support desk where you can register your product, send emails to our technical support, and find a list of frequently asked questions (FAQs). DXG USA...
Need help?
Do you have a question about the DXG-595V and is the answer not in the manual?
Questions and answers