Restoring The System; Backup Status And Configuration; Cleaning Up The Disk - Lenovo 30113RU - IdeaCentre A600 - 3011 User Manual

4.1 Restoring the System

The system can develop problems due to erroneous operation or the installation of
additional software. If software problems develop in the originally installed software,
you can restore the system by using system backup and restoration features.
Note: The existing system settings will change after restoration. Check the
settings of the restored system to ensure they match settings that may be
critical to your needs.
Use the following procedure to restore the software to a known functional level:
1. Click Start
Restore.
2. Choose either the recommended restore point, or select a different recovery
time from the pop-up box. Choose the latest date when the system was running
properly.
Click Next to continue.
3. The system will start restoration. When all processes run to completion, the
system displays a message informing you that the restore operation has
completed successfully.
4.2 Backup status and configuration
For security purposes, you can back up the system status before you install
additional software, or otherwise modify system settings. To back up the system
status, do the following:
1. Click Start
status and configuration.
2. Select the location for your backup. Click Next and follow the instructions to
continue.

4.3 Cleaning Up the Disk

Do the following periodically to clean up the disks and possibly enhance your
computer's performance:
1. Click Start
Cleanup.
2. Choose the disk you want to clean up.
34
User Guide
31036433_A6_UG_EN_V1.0.indd 34
All Programs Accessories
All Programs Accessories
All Programs Accessories
System Tools System
System Tools Backup
System Tools Disk
2009.1.19 6:47:29 PM