Troubleshooting Tools And Utilities; Dell Diagnostics; When To Use The Dell Diagnostics - Dell bpcwcsn_5 - OptiPlex - 740 User Manual

Troubleshooting Tools and Utilities

Dell Diagnostics

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in
Product Information Guide
the

When to Use the Dell Diagnostics

If you experience a problem with your computer, perform the checks in this section and run the Dell
Diagnostics before you contact Dell (see "Contacting Dell" on page 351) for technical assistance.
It is recommended that you print these procedures before you begin.
NOTICE:
The Dell Diagnostics works only on Dell™ computers.
Enter system setup, review your computer's configuration information, and ensure that the device
you want to test displays in system setup and is active (see "Entering System Setup" on page 257).
Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities media.
Starting the Dell Diagnostics From Your Hard Drive
The Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive.
NOTE:
If your computer cannot display a screen image, contact Dell (see "Contacting Dell" on page 351).
1 Shut down the computer. Turn on (or restart) your computer.
2 When the DELL™ logo appears, press <F12> immediately.
NOTE:
If you see a message stating that no diagnostics utility partition has been found, run the Dell
Diagnostics from your Drivers and Utilities media (optional).
If you wait too long and the operating system logo appears, continue to wait until you see the
®
Microsoft Windows
3 When the boot device list appears, highlight Boot to Utility Partition and press <Enter>.
4 When the Dell Diagnostics Main Menu appears, select the test you want to run.
Starting the Dell Diagnostics From the Drivers and Utilities Media (Optional)
1 Insert the Drivers and Utilities media.
2 Shut down and restart the computer.
When the DELL™ logo appears, press <F12> immediately.
.
®
desktop. Then shut down your computer and try again.
Troubleshooting Tools and Utilities
16
327