ViewSonic VA2016W - 20" LCD Monitor Service Manual page 22

*6 When OSD appears on screen, the OSD Lock/Unlock short cut key will be disabled.
2-6-5 Input Signal Notice Actions
1. The Input Signal Notice OSD appears 1 second when power turns on or change input signal.
2. The Input Signal Notice OSD position is on the right-top side of image.
2-6-6 Resolution Notice Actions
1. Resolution Notice OSD should show on screen after changing to non-native mode for 30 sec
2. For auto input select function, it shall meet the requirement in Appendix D.
3. The OSD should disappear after 10 sec or by pushing button [1] or [2]
4. Resolution Notice function should be disabled when push button [2] under Resolution Notice
OSD
2-6-7 0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to buffer for
further use
2. It should be reset by Memory Recall function
(Should not reset by power off, power unplug and others)
2-6-8 OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There shall not be a
separate save
ViewSonic Corporation
19
Confidential - Do Not Copy
VA2016w-2