ViewSonic VA2016W - 20" LCD Monitor Service Manual page 13

[▲]
[1]+ [ ]
No signal + [ ] + [2]
Signal + [2] + [ ]
Remark : All the short cuts function are only available while OSD off
2-6-3 MAIN MENU OSD TABLE
Main Menu
Level 1
Auto Image Adjust
1. Background = blanking
2. The message OSD position is at the
center.
3. After auto tune, OSD shall be off
4. Only for analog mode
Contrast/Brightness
ViewSonic Corporation
(refer to segment 4-6-5)
1. Long Press [up] key 3 seconds to switch DCR On/Off,
2. Loop: DCR On <=> DCR Off
When switch to DCR ON
When switch to DCR OFF
3. DCR Off in Factory mode.
4. Reset to default when re-power on/off
5. Message will appear only after Hot Key is pressed
All reset
Burning mode
Factory Mode
1. Key button definition:
[1]: OSD off
[2]: Execute the selected function
[Up]: Rolling up the slider
(When push the button on the top position, the slider
shall go down to the bottom item)
[Dn]: Rolling down the slider
Level 2
Contrast
10
Confidential - Do Not Copy
Level 3
VA2016w-2