Displaying The Menu; Menu Operation - Panasonic BTH1700BP - IND. MONITOR Operating Instructions Manual

BASIC MENU OPERATIONS
(MAIN MENU, SET-UP MENU) (cont'd)
7

DISPLAYING THE MENU

SCREENS
¶ To display MAIN MENU
Press the MENU button on the front panel.
¶ To display SET-UP MENU
Press the button while pressing the
NOTES:
• To exit the MENU, press the MENU button several times.
• The MENU automatically exits about 30 seconds after the last Menu
operation.
• To go back the previous MENU, press MENU.
7

MENU OPERATION

PROCEDURE
Example: Adjusting the "BRIGHT" value to "+10".
1. Press the button while
"SET-UP MENU" is displayed on the screen.
<SET-UP MENU>
FUNCTION SETTING
PICTURE SUB ADJ.
COLOR TEMP./BAL.
SIZE/POSI. ADJ.
DISTORTION ADJ.
STATUS DISPLAY
CONTROL LOCK
all reset
EXIT: MENU ENTER: +
2. Select "PICTURE SUB ADJ." by pressing the
button, then press the
"PICTURE SUB ADJ." menu is displayed on the screen.
<PICTURE SUB ADJ.>
CONTRAST
BRIGHT
CHROMA
PHASE
NTSC SETUP
COMPO.LEVEL
sub menu
reset
EXIT: ADJUST: – +
MENU
3. Select "BRIGHT" by pressing the
4. Press the and/or
required to obtain the brightness desired.
Example: Setting brightness to "+10".
<PICTURE SUB ADJ.>
CONTRAST
BRIGHT
CHROMA
PHASE
NTSC SETUP
COMPO.LEVEL
sub menu
reset
EXIT: MENU ADJUST: – +
5. Delete the "SET-UP MENU" by pressing the
MENU button several times.
12
button on the front panel.
button is pressed.
: OFF
SELECT:
button.
: 00
: 00
: 00
: 00
: 00
:SMPTE
SELECT:
button .
buttons as many times as
: 00
:+10
: 00
: 00
: 00
:SMPTE
SELECT:
7
About " sub menu"
Only displays selected items. (sub-menu display) Allows
you to adjust and set items while looking at the actual
screen.
NOTE:
This function is available only when "
MENU.
Example: Setting an item in the "PICTURE SUB ADJ."
with the sub-menu.
1. Press the button while
"SET-UP MENU" is displayed on the screen.
2. Select "PICTURE SUB ADJ." by pressing the
button, then press the
3. Select " sub menu" by pressing the
several times, then press the
The adjustment bar is displayed at the bottom or top of the
screen.
4. Select the desired setup item by pressing the
and buttons (several times).
5. Press the and/or
required to obtain the desired setting.
¶ To delete the sub-menu display:
Press the MENU button on the front panel.
• The previous MENU display is restored.
¶ To change the position of the sub-menu display
1. Display the "MAIN MENU" by pressing the MENU button.
2. Select "sub menu POSI." by pressing the
times.
3. Set "UPPER" or "LOWER" by pressing the
buttons.
CONTRAST
– –
CONTRAST
– –
7
About "reset"
Restores all MENU settings (currently displayed) to
factory-preset values.
Select "reset" using the /
button.
NOTE:
This function is only available when "reset" is displayed in the MENU.
sub menu" is displayed in the
button is pressed.
button.
button
button.
buttons as many times as
button several
and
: 00
[UPPER]
+ +
: 00
[LOWER]
+ +
buttons, then press the