Accessing The On-Screen Display (Osd) Menus - IBM 9503DG1 - T 221 - 22.2" LCD Monitor User Manual

Accessing the on-screen display (OSD) menus

You can access the on-screen display (OSD) menus by pressing the
Menu/Enter button. The OSD menus enable you to set the various
operating conditions of your monitor.
The OSD menus consist of the following:
Main menu (for menu selection)
Submenus (for controls setting)
- Brightness level
- Video input type (single, 2-Vertical stripes, 4-Vertical stripes, 4-tiles)
- Display key information (vertical frequency resolution)
Main menu
To access the Main menu, press the Menu/Enter button. The Main menu
appears on the display screen.
OSD Icon Description
Used to display the Brightness submenu.
Used to display the Video Input submenu.
Used to display the Information submenu.
Exit from the Main menu.
To exit the Main menu, select the Exit icon using the Left-Arrow or the
Right-Arrow button, then press the Menu/Enter button.
To reset the OSD settings to the default value, do the following:
1. Power off the monitor.
2. While pressing the Menu/Enter button, press the Power switch to on.
The Power light changes cyclically between green and amber for
several seconds. And the screen remains blank before the default
settings are restored.
Note: This does NOT reset any changes to the EDID settings.
Chapter 3. Adjusting and maintaining your monitor 13