Setting The Clock Display (Clock); Switching The Aux Mode (Aux); Setting The Dimmer (Dimmer) - Pioneer FH-P8800 Operation Manual

Initial Setting

Setting the Clock Display (CLOCK)

You can set this product so that after performing an operation, time indications are auto-
matically displayed if you do not perform another operation within about 25 seconds.
1. Press the FUNCTION button and select the Clock display mode (CLOCK)
in the Initial Setting Menu.
2. Switch the Clock display
ON/OFF with the 5/∞ buttons.

Switching the AUX Mode (AUX)

It is possible to use auxiliary (AUX) equipment with this product.
Activate the AUX mode when using external equipment with this product.
1. Press the FUNCTION button and select the AUX Setting mode (AUX) in the
Initial Setting Menu.
2. Switch the AUX ON/OFF with
the 5/∞ buttons.

Setting the Dimmer (DIMMER)

To enable this product's display from being too bright at night, when the vehicle's head
lights are turned ON the display is dimmed. You can switch this function ON/OFF.
1. Press the FUNCTION button and select the Dimmer mode (DIMMER) in
the Initial Setting Menu.
2. Switch the Dimmer ON/OFF
with the 5/∞ buttons.
47