Panasonic Lumix DMC-SZ5 Owner's Manual page 127

∫
When connecting with [Add wireless AP]
1
On the screen displayed in step
(P126), select [Add wireless AP] by pressing 3/4, then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
•
For details on how to enter characters,
3
Press 3/4 to select the network authentication type, and press [MENU/SET].
•
For information on network authentication, see the manual of the wireless access point.
4
Press 3/4 to select the encryption type, and press [MENU/SET].
•
The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
[WPA2-PSK]/[WPA-PSK]
[Common Key]
[Open]
[No Encryption] # A message is displayed when the wireless access point has been saved.
•
5
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
•
A message is displayed when the wireless access point has been saved.
Wi-Fi
1
of "When connecting with [Manual Connection]"
refer to "
Entering Text
Encryption types that can be set
[TKIP]/[AES]
[WEP]
[No Encryption]/[WEP]
- 127 -
"
section on P71.