Panasonic Lumix DMC-SZ5 Owner's Manual page 126

When connecting with [WPS (Push-Button)]
Press the wireless access point WPS button until it switches to WPS Mode.
• A message is displayed when the wireless access point has been saved.
•
Refer to the wireless access point instruction manual for details.
When connecting with [WPS (PIN)]
1
Press 3/4 to select the wireless access point you are connecting to, and press
[MENU/SET].
2
Enter the PIN code displayed on the camera screen into the wireless access point.
3
Press [MENU/SET].
•
A message is displayed when the wireless access point has been saved.
•
Refer to the wireless access point instruction manual for details.
When connecting with [Manual Connection]
1
Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
•
Touching [DISP.] will search for a wireless access point again.
•
For details on how to connect with [Add wireless AP], refer to
connecting with [Add wireless AP]
2
(If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters,
on P71.
•
A message is displayed when the wireless access point has been
saved.
Wi-Fi
"
. (P127)
refer to "
Entering Text
- 126 -
"
When
"
section