Table of Contents
Advertisement
Taking Still Images in 3D Mode
You can record 3D images by pressing the 3D button to set
to the 3D mode. During 3D mode, "3D" is displayed on the
LCD monitor.
1
Open the lens cover.
.
2
Open the LCD monitor and select the still
image mode.
.
0 The still image icon B appears.
3
Press the 3D button to set to the 3D mode.
.
0 During 3D mode, "3D" is displayed on the LCD
monitor.
0 3D images may be recorded when the 3D button
lights up.
4
Set the focus on the subject.
Press halfway
.
0 When focused, the focus icon lights up in green.
5
Take a still image.
Press fully
.
0 PHOTO lights up when a still image is being
captured.
Memo :
0 When 3D recording is performed, still images will be saved
in both 3D and 2D formats.
0 3D still images are saved as MP files (*.mpo).
0 3D still images cannot be printed. To print, make use of
the 2D still image that is captured at the same time.
0 To record 3D images, refer also to ""Precautions on
Recording and Playing Back 3D Images" (A p. 4) ".
0 If the left and right images of an object close to the camera
do not appear to be in alignment, or the 3D effect of a
distant object is weak, adjust the parallax.
"Adjusting Parallax During Recording" (A p. 32)
0 When "PARALLAX ADJUSTMENT" is assigned to the
ADJ button, parallax can be adjusted manually using the
ADJ button and control dial.
"Using the Control Dial for Recording" (A p. 45)
Recording
25
Advertisement
Table of Contents
