Table of Contents
Advertisement
Other Problems
The buttons on the touch screen do not work.
Tap the buttons on the touch screen with your fingers.
The buttons may not respond if you touch them with your
fingernails or with gloves on.
The unit operates slowly when switching
between video mode and still image mode, or
when switching the power on or off.
It is recommended that you copy all videos and still images
onto your computer, and erase the files from this unit. (If there
are many recorded files on this unit, it takes time for the unit
to respond.)
The image is grainy.
When digital zoom is used, the image becomes grainy as it
is digitally enlarged.
This unit heats up.
This is not a malfunction. (This unit may become warm when
used for a long time.)
Make a backup of important recorded data.
It is recommended to copy your important recorded data to a
DVD or other recording media for storage.
JVC will not be responsible for any lost data.
When connected to the TV via the HDMI mini
cable, proper images and sounds are not
output.
Images and sounds may not be output properly depending
on the TV connected. In such cases, perform the following
operations.
A Disconnect the HDMI mini cable and connect it again.
B Turn off and on this unit again.
"Connecting via the HDMI Mini Connector" (A p. 68)
The language on the display changed.
It may occur when you connect this unit to a TV with different
language setting using an HDMI mini cable.
"Operating in Conjunction with TV via HDMI" (A p. 67)
HDMI-CEC functions do not work properly,
and the TV does not work in conjunction with
this unit.
TVs may operate differently depending on the specifications,
even if they are HDMI-CEC compliant. Therefore, the HDMI-
CEC functions of this unit cannot be guaranteed to operate
in combination with all the TVs.
In such cases, set "HDMI CONTROL" to "OFF".
"Operating in Conjunction with TV via HDMI" (A p. 67)
Error Message?
CHECK LENS COVER
Open the lens cover.
SET DATE/TIME!
Connect the AC adapter, charge the battery for more than 24
hours and set the clock. (If the message still appears, the
clock battery is exhausted. Consult your nearest JVC dealer.)
"Clock Setting" (A p. 14)
COMMUNICATION ERROR
Reconnect the USB cable.
Turn off this unit and the devices connected to it, and turn
them on again.
Reattach the battery pack.
FORMAT ERROR!
Check the operating procedure, and perform once again.
" FORMAT BUILT-IN MEM. " (A p. 119)
Turn off and on this unit again.
DATA DELETION ERROR
Check the operating procedure, and perform once again.
" ERASE ALL DATA " (A p. 120)
Turn off and on this unit again.
ERROR IN BUILT-IN MEMORY!
Turn off and on this unit again.
If the above does not solve the problem, back up your files
and execute "FORMAT BUILT-IN MEM." in the "COMMON"
menu. (All data will be deleted.)
" FORMAT BUILT-IN MEM. " (A p. 119)
MEMORY CARD ERROR!
Turn off and on this unit again.
Remove the AC adapter and battery pack, then remove and
re-insert the SD card.
Remove any dirt from the SD card terminals.
If the above does not solve the problem, back up your files
and execute "FORMAT SD CARD" in the "COMMON" menu.
(All data will be deleted.)
" FORMAT SD CARD " (A p. 120)
NOT FORMATTED
Select "OK", then select "YES" on the "DO YOU WANT TO
FORMAT?" screen.
Troubleshooting
129
Advertisement
Table of Contents
