Others
The flash is not activated.
•
Is the flash closed?
> Slide the [
The flash is activated 2 times.
•
The flash is activated 2 times. The interval between the first and second flash is longer when
Red-eye Reduction (P59) is set so the subject should not move until the second flash is
activated.
The LCD monitor turns off although the camera is turned on.
•
The LCD monitor turns off when [AUTO LCD OFF] (P32) is selected for the [ECONOMY] Mode.
[This does not happen when using the AC adaptor (P161).]
The LCD monitor/Viewfinder is too bright or dark.
> Adjust the brightness of the LCD monitor/viewfinder to a proper level. (P31)
•
[POWER LCD] is activated. (P32)
It may flicker for an instant or the brightness of the screen may change significantly
for an instant.
•
This occurs due to the aperture of the lens changing when the shutter button is pressed
half-way, or when the brightness of the subject changes. This is not a malfunction.
The picture is not displayed on the LCD monitor.
•
Does the picture appear on the viewfinder?
> Press [LVF/LCD] to switch to LCD monitor display. (P36)
•
Is the LCD monitor switched off?
> Switch the display by pressing [DISPLAY]. (P54)
LCD monitor and viewfinder do not switch when [LVF/LCD] is pressed.
•
It is only displayed on the LCD monitor when the camera is connected to a PC or printer.
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor.
176
VQT2S62
OPEN] lever to open the flash. (P57)
LCD monitor/Viewfinder
Flash