Table of Contents
Advertisement
INSTRUCTIONS
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the unit. Use a screwdriver to
loosen the screw.
3. Install 3 new 'AA' (AM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery
cover.
BATTERY NOTICE
•
The use of new alkaline batteries is recommended for maximum
performance.
•
Non-rechargeable batteries are not to be recharged.
•
Rechargeable batteries are to be removed from the toy before
being charged (if removable).
•
Rechargeable batteries are only to be charged under adult
supervision (if removable).
•
Do not mix old and new batteries.
•
Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
•
Only batteries of the same or equivalent type as recommended
are to be used.
•
Batteries are to be inserted with the correct polarity.
Advertisement
Table of Contents
