Sound System Problems - Toshiba M200 - Portege - Pentium M 1.5 GHz User Manual

184
If Something Goes Wrong
Resolving a hardware conflict
Examine the disc to see if it is dirty. If necessary, wipe it with a
clean cloth dipped in water or a neutral cleaner.
Replace the disc in the tray. Make sure that the disc is lying flat,
label side up. Close the tray carefully, making sure it has shut
completely.
You press the disc eject button, but the drive tray does not
slide out.
Make sure the computer is connected to a power source and turned
on. The optical drive eject mechanism requires power to operate.
Make sure a program is not accessing the drive and preventing it
from ejecting.
If you need to remove a disc and cannot turn on the computer (for
example, if the battery is completely discharged), use a narrow
object, such as a straightened paper clip, to press the manual eject
button. This button is in the small hole next to the optical drive eject
button on the face of the optical drive tray.
Some discs run correctly but others do not.
Check that the type of disc you are using is compatible with your
optical drive. For more information regarding supported optical
media formats, refer to the complete detail specifications for your
computer at pcsupport.toshiba.com.
If the problem is with a data optical disc, refer to the software's
documentation and check that the hardware configuration meets the
program's needs.
The disc will not come out of the drive when you click the
eject button on the screen.
Press the button on the optical drive itself. For additional
information see
does not slide out." on page

Sound system problems

No sound is coming from the computer's speakers.
Adjust the volume control.
Try pressing
Check to see if the volume control on the computer is turned up.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
"You press the disc eject button, but the drive tray
to see if volume mute is disabled.
Fn + Esc
184.