Lamp Replacement - Dukane Starfire HD 4010 Operation Manual

LAMP REPLACEMENT

Your projector uses:
3000, 3010 — 360W, ENX.
4010, 4030, 5510, 6000 — 410W, FXL.
Lamp and adjacent metal parts are hot. Allow lamp to cool
before replacing. Glass components may shatter.
To Remove an Exhausted Lamp:
1. Remove the lamp by squeezing the lamp retainer clip and
remove lamp.
2. Avoid touching the new lamp — oily skin can cause discoloration
of the lamp capsule or reflector.
3. Push the new lamp down into socket until firmly seated and
the reflector lines up with the aperture. Re-engage the lamp
retainer clip.
WARNING
Handle carefully.
9