PREPARATION PROCEDURES
Before beginning any of the removal and replacement procedures, complete
the following steps:
1.
Turn the computer and any peripheral devices off.
2.
Disconnect the AC power cord from the AC outlet then from the system
unit.
3.
Disconnect all external peripheral devices from the computer.
REMOVAL AND REPLACEMENT PROCEDURES
Side Access Door/Front Bezel
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WARNING <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
High voltage present.
ProSignia PC Server without the system unit cover on.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
1.
Loosen thumb screws (3) on back bezel.
2.
Slide side access door back and then out.
3.
Remove front bezel retaining screw (1).
4.
Pull front bezel off at the three pressure points shown in figure.
System Unit Cover Removal
Extreme care must be taken when running the COMPAQ