Creating The Timing Chart And The Program Setting Value Table; Starting Condition Added To The First Edition; Appendix; Parts For Extended Option - Brother BAS-311E Option Manual

4-4 Creating the timing chart and the program setting value table

Refer to the three examples of page 196-198 of the instruction manual.
•Create the timing chart showing ON and OFF of I/O in operation order.
‚Based on the timing chart and condition number table (see instruction manual page 191-), create a
program setting value table.
ƒInput program setting value by the programmer.

4-5 Starting condition added to the first edition

Condition No.
18 Immediately after the power is turned on and the preparation of machine
operation is completed.
19 After the air pressure drop error is detected.
20 After split is completed (before moving to the next sewing start position).
21 After split is completed (after moving to the next sewing start position).

Appendix

1. Parts for extended option

2. Check PCB circuit diagram

3. Block diagram

Operation meeting the condition
17