Table of Contents
Advertisement
Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available.
Preparation:
Use the Capture feature to store JPEG or BMP files in a PC card inserted into the projector's slot. Or store JPEG
or BMP files in a PC card inserted into your PC's slot and insert the PC card into the projector's slot.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
3. Use the
button to select "Thumbnails" and then press the ENTER button.
The Thumbnail screen will be displayed.
Slot 1
3 Files
_CAP_
_RESTORE
RECYCLED
1/3 0000.jpg
60KB
select : ENTER
NOTE: To change highlight from the Thumbnails screen (right window) to a directory tree (left window) , press the CANCEL
button. To return highlight to the Thumbnails screen, press the ENTER button.
4. Use
button to select a JPEG or BMP file (slide) for your background logo.
5. Press the MENU button to display the Viewer menu.
6. Use the
button to select "Logo" and then press the ENTER button.
A confirmation dialog box will be displayed.
7. Use the
button to select "OK" and press the ENTER button. This completes changing a logo for the
background.
*
Once you have changed the background from the NEC logo to another, you cannot return the logo to back-
ground even by using "Reset".
0000.jpg
0001.jpg
0002.jpg
folder : CANCEL
?
64
5. Using the Viewer
Advertisement
Table of Contents
Troubleshooting
