Turning Off The Projector; After Use - Dukane 8768 User Manual

Turning off the Projector

To turn off the projector:
First, press the POWER (ON/STAND BY) button on the projec-
tor cabinet or the POWER OFF button on the remote control for
a minimum of two seconds.
The power indicator will glow orange. After the projector turns
off, the cooling fans keep operating for 10 seconds (Cooling-off
time).
Secondly, turn off the Main Power switch. The power indicator
will go out.
Finally unplug the power cable.
CAUTION
Do not unplug the power cable from the wall outlet or do not turn off
the main power under any one of the following circumstances.
Doing so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the cooling fans are running. (The cooling fans continue to
work for 10 seconds after the projector is turned off).

After Use

Preparation: Make sure that the projector is not turned on.
1. Unplug the power cable.
2. Disconnect any other cables.
3. Retract adjustable tilt feet if extended.
4. Cover the lens with the lens cap.
5. Put the projector and its accessories in the supplied soft carrying case.
3. Projecting an Image (Basic Operation)
SELECT
PC CARD
38
OFF
VIDEO
SOURCE AUTO ADJUST
S-VIDEO
LAMP
STATUS
POWER
3D REFORM ON/STAND BY
Cr /P r
ON
POWER
AUTO ADJ.
COMPUTER
1 2
COMPONENT
SELECT