Table of Contents
Advertisement
Available languages
Available languages
O O
P P
E E
R R
A A
T T
O O
P P
E E
R R
A A
T T
Input Menu
The following functions are available when INPUT is selected on the
menu. Select an item with the
operation with the
effective on video input mode only, not on RGB input mode, except in
the P.IN P. window on RGB input mode.
Table 5. Input Menu
Item
Automatic Adjustment at RGB Input: Select the EXECUTE with the
button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock
phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.
Use with the window at maximum size in the application display.
Automatic Adjustment at Video Input: Select the EXECUTE with the
AUTO
button. A signal type appropriate for the input signal is selected
automatically when EXECUTE is selected automatically. Valid only when
AUTO is set for VIDEO on the menu.
• This operation requires approximately 10 seconds. It may not function correctly with
some input signals. Pressing the AUTO button in this case may correct this problem.
• This function is the same as for the AUTO function in Basic operation.
Displays RGB Input Frequency: Displays the horizontal and vertical sync
RGB
signal frequencies for RGB input.
• Valid only at RGB input.
Select Video Signal Type: Select the signal type with the
buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as
appropriate for the input signal. The selection of AUTO enables and
executes the function AUTO (Automatic Adjustment at Video Input), except
for the N-PAL input.
• Use this function when the image becomes unstable (eg. the image becomes
VIDEO (**)
irregular, or lacks color) at VIDEO/S-VIDEO input.
• Automatic Adjustment requires approximately 10 seconds. It may not function
correctly with some input signals. Pressing the AUTO button in this case may correct
this problem except for the N-PAL input.
• For the COMPONENT VIDEO input, this function is not effective and the signal type
is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the
signal of HDTV.
Set/Clear Black Enhancement Mode: Select the TURN ON / TURN OFF
with the
BLACK (**)
enhancement mode is active and the contrast ratio of the screen for the
video input will be raised by making black level darker.
Select Progressive Mode: Select the mode suitable for the input signal
with the
Progressive
interlaced video signal into the progressive signal. The FILM mode is
(**)
adptable 2-3 Pull-Down system to the conversion.
• Use this function to raise resolution, at the interlaced video input except HDTV
signal.
Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the
HDTV
input signal with the
I I
O O
N N
S S
( (
c c
I I
O O
N N
S S
( (
c c
and
buttons, and start or stop
and
buttons. The function indicated (**) are
/
button. When the TURN ON is selected, the black
and
buttons. The TV mode and the FILM mode convert the
/
o o
n n
t t
i i
n n
u u
e e
o o
n n
t t
i i
n n
u u
e e
Description
button.
d d
) )
d d
) )
SETUP
INPUT
IMAGE
EXECUTE
AUTO
RGB
CANCEL
VIDEO
Progressive
BLACK
HDTV
and
ENGLISH-13
ENGLISH-13
OPT.
Advertisement
Chapters
Table of Contents
