Check Your Computer; Necessary Environment For Computers To Be Connected; Connecting With Wired Lan - Panasonic PT-LB1 Operating Instructions Manual

Check your computer

Necessary environment for computers to be connected

•
First, check your computer to see whether or not it has a wired LAN
LAN : "Glossary" (See page 18)
•
Before connecting the computer to the projector, be sure to check the following settings.
Check 1
For LAN cable
•
Is the cable properly connected?
•
Use LAN cable that is compatible with category 5 or above.
Check 2
Wired LAN settings
<Computer with a built-in wired LAN function>
•
Is your wired LAN switched on?
<Computer without a built-in wired LAN function>
•
Is your wired LAN adapter properly recognized?
•
Is your wired LAN adapter switched on?
•
Install the wired LAN adapter driver beforehand.
For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.
Check 3
For WebBrowser
•
WebBrowser is necessary to use WEB control.
•
Compatible OS : Windows XP/Windows Vista/Windows 7
Mac OS X v10.4/v10.5/v10.6
•
Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0
Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our hand (body)
causing a malfunction.

Connecting with Wired LAN

Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing
any settings.
1
Turn on the computer.
2
Make the network setting according to your system administrator.
If the projector settings are the default settings (See page 6), the computer can be used with the following network
settings.
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
Safari 2.0/3.0/4.0
192.168.10.101
255.255.255.0
192.168.10.1
function.
4