JVC DLA-HD2K-SYS - D-ila Projector Specifications page 3

13.2.12 Menu Button
Used to raise or lower the On Screen Menu. If the button is held for 5
seconds the unit will enter setup mode. Pressing menu again will return
the unit back to user mode.
13.2.13 Value Right button
Used to change the values in the menus when the On Screen Display is
used. Used to change the settings when in the setup mode when referring
to the LCD display
13.2.14 Preset Button
Used to recall user store profile
13.2.15 Function Down Button
Used as a navigation key with the On Screen Display
13.2.16 Store Button
Used to store the current settings to a user profile. When in setup mode the
store key is used to verify and store the newly selected scan rate.
13.2.17 0 – 9 Buttons
Used to enter values when using the direct access levels for the picture
controls.
13.2.18 Brightness Button
Used to raise and lower the picture brightness level
13.2.19 Contrast Button
Used to raise and lower the picture contrast level
13.2.20 Color Button
Used to raise and lower the picture color level
13.2.21 Tint Button
Used to raise and lower the picture tint level
(Composite NTSC only)
13.2.22 Detail Button
Used to raise and lower the picture detail level
13.2.23 Anamorphic Button
Direct access to select the picture in anamorphic aspect ratio
13.2.24 4:3 Button
Direct access to select the picture in 4:3 aspect ratio
16