Turning Off The Power - Hitachi CP-DW10N Operating Manual

Turning off the power

1. Press the STANDBY/ON button on the
projector or the remote control.
The message "Power off?" will appear on
the screen for about 5 seconds.
2. Press the STANDBY/ON button again
while the message appears.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will
stop blinking and light in steady orange
when the lamp cooling is complete.
3. Attach the lens cover, after the POWER
indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING
during use or just after use, since it is too hot.
close to the projector and easily accessible.
NOTE Please power off the projector after any connected devices are
powered off.
Guide" in the CD.
STANDBY/ON button
STANDBY/ON
12
POWER indicator
INPUT
MENU
LAMP
TEMP
POWER
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
MAGNIFY FREEZE PAGE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1
POSITION
ENTER
ESC
BLANK
VOLUME
MUTE
2
MENU
RESET