Printing A Test Sample Page - Brother HL-730 Quick Setup Manual

English: HL-YL Quick Setup Guide, Body

Printing a Test Sample Page

We recommend that you print a test page. Refer to the instructions below.
NOTE
The following test sample page operation will be invalid after the printer receives any data
from your computer.
The test sample page can be printed by using the "Test Print Mode" procedure in Chapter 3
of the User's Guide.
NOTE
If the printer does not print a test sample page, see "CHAPTER 6 TROUBLESHOOTING,
Q & A" of the User's Guide. If you are still unable to print a test sample page after reviewing
the information in the User's Guide, consult your dealer.
After printing the test sample page, you are ready to prepare your computer to work with the
printer. The software setup varies depending upon your computer and operating system. Refer
to the relevant following section:
Action 6-1: Prepare Windows 95 for the Printer
Action 6-2: Prepare Windows 3.1 for the Printer
Action 6-3: Prepare DOS for the Printer (Only for HL-730 series Users)
Action 6-4: Prepare Macintosh for the Printer (Only for HL-730 series Users)
Press the control panel switch.
The printer will start printing a test sample
page.
NOTE
The HL-730 series printer can also print
settings, fonts, and hexadecimal values of
received data. For more information, see
"Test Print Mode" in Chapter 3 of the
User's Guide.
8