Advertisement
F I L L E R S T R I P S
VFLR4
Model
VCF90
( each side is 3"W. ) - Corner filler strip. For use in 90° cabinet bends
VCF135
( each side is 3"W. ) - Corner filler strip. For use in 135° cabinet bends
VFLR4
( 4"W. ) - General filler strip used to separate appliance based cabinets
VOCF90
( each side is 4"W. ) - outer corner filler strip used to connect two back panels at a
90º angle and add countertop support. Shipped with two unattached back panels
VOCF135
( each side is 4"W. ) - outer corner filler strip used to connect two back panels at a
135º angle and add countertop support. Shipped with two unattached back panels
C A B I N E T S I D E PA N E L S
• heavy-duty stainless steel
• used to finish sides of base cabinets at the end of the cabinet run
• fit flush into recessed sides of cabinets
• optional toe kick included
Model
VSP30
( 30"W. x 29
3
/
"H. ) - To finish the side of any base cabinet at the end of a run
4
VTHP30
( 30"W. x 34"H. ) - Half oven tower side panel. For use when countertop runs into the oven tower
VTSP30
( 30"W. x 68"H. ) - Oven tower side panel for use at the end of a run
• attach between cabinets to separate cabinets and create turns
• sides are to be mounted flush with doors and not the cabinet face
• optional toe kick included
7
Approx. Shipping wt. lb (kg)
5 (2.3)
5 (2.3)
5 (2.3)
40 (18.1)
40 (18.1)
Approx. Shipping wt. lb (kg)
16 (7.3)
15 (6.8)
33 (14.9)
Advertisement
