Transfer Belt Replacement - Oki CX2032MFP User Manual

Transfer belt replacement

The belt unit is located under the four image drums. This unit requires
replacement approximately every 60,000 pages.
Switch off the MFP and allow the fuser to cool for about 10 minutes
before opening the cover.
1. Gently raise the scanner.
2. Press the cover release (a) and open the MFP's top cover (b)
fully.
If the MFP has been powered on, the fuser will be hot.
This area is clearly labelled. Do not touch.
Cover Release.eps
a
WARNING!
CX2032 MFP User's Guide Maintenance
Scanner up.eps
116