Table of Contents
Advertisement
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
4.4.5
MPS Configuration
The items in this menu allows you to configure the Multi-Processor Table.
Select an item then press <Enter> to display the configuration options.
MPS Configuration
MPS Revision
MPS Revision [1.4]
Allows you to select the multi-processor system revision.
Configuration options: [1.1] [1.4]
4.4.6
Remote Access Configuration
The items in this menu allows you to configure the Remote Access
features. Select an item then press <Enter> to display the configuration
options.
Configure Remote Access type and parameters
Remote Access
Serial port number
Base Address
Serial Port Mode
Flow Control
Redirection After BIOS POST
Terminal Type
VT-UTFB Combo Key Support
Media Type
Remote Access [Enabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]
4-26
[1.4]
[Enabled]
[COM1]
[3F8h, 4]
[115200 8,n,1]
[None]
[Always]
[ANSI]
[Enabled]
[Serial]
Select MPS Revision.
Select Remote Access
type.
Chapter 4: BIOS setup
Advertisement
Table of Contents
