Hardware Monitor - Asus K8N-VM User Manual

Power On By PS/2 Keyboard [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 keyboard
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Restore On AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
2.5.5

Hardware Monitor

Hardware Monitor
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan Speed
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature [xxxºC/xxxºF] or [Ignored]
MB Temperature [xxxºC/xxxºF] or [Ignored]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Ignored if you do not wish to
display the detected temperatures.
2-32
Power
v02.58 (C)Copyright 1985-2002, American Megatrends, Inc.
BIOS SETUP UTILITY
[51ºC/122.5ºF]
[41ºC/105.5ºF]
[3813 RPM]
[N/A]
[ 1.632V]
[ 3.296V]
[ 5.256V]
[12.196V]
CPU Temperature
Select Screen
Select Item
+-
Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 2: BIOS setup