Asus K8N-DRE - Motherboard - Extended ATX User Manual page 127

User guide

Table of Contents

Press <Esc>.

When prompted, select < S a v e c h a n g e s , t h e n e x i t t h i s m e n u >

then press <Enter>.

To delete a hot spare drive assigned to a RAID set:

From the RAID Properties screen, press <F2> to select

< A d d / D e l e t e H o t S p a r e >

< A d d / D e l e t e H o t S p a r e >.

< A d d / D e l e t e H o t S p a r e >

Use the arrow keys to select the spare drive you want to delete.

Move the selection to the H o t S p a r e

change the Hot Spare status to [ N o ]

Press <Esc>.

When prompted, select < S a v e c h a n g e s , t h e n e x i t t h i s m e n u >

then press <Enter>.

Next Array

The Next Array menu allows you to select the other array on the physical

adapter. This screen is enabled when there are more than one array on a

physical adapter. The RAID Properties screen allows display of one array at

a time. This menu allows you to display and operate on the other array(s)

detected.

Activate Array

When there are two arrays on a physical adapter, this menu allows you to

instruct the RAID firmware to activate a selected array. Only one array may

be activated at a time for each physical adapter. For a physical adapter

with multiple arrays, activating one array disables all the remaining arrays.

A S U S K 8 N - D R E

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >,

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >

H o t S p a r e column, then press <Enter> to

H o t S p a r e

[ N o ].

[ N o ]

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >,

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >

5 - 2 9

Table of Contents