Asus K8N-DRE - Motherboard - Extended ATX User Manual page 115

User guide

Table of Contents

S C S I B u s S c a n O r d e r

Indicates the order in which to scan SCSI identifiers on an adapter.

Changing this item will affect drive letter assignment(s) if more than

one device is attached to an adapter.

Changing this item may conflict with an operating system that

automatically assigns drive order.

R e m o v a b l e M e d i a S u p p o r t

Allows you to specify the removable media support option for an

adapter. Select [None] to disable removable media support whether

the drive is selected as first (BBS), or is first in the scan order (non-

BBS). Set this item to [Boot Drive Only] to enable removable media

support for a removable hard drive if it is first in the scan order. Select

[With Media Installed] to enable support for removable media

regardless of the drive ordering.

C H S M a p p i n g

Defines how the Cylinder Head Sector values are mapped into a disk

without pre-existing partition information. CHS Mapping allows either

S C S I P l u g a n d P l a y M a p p i n g

S C S I P l u g a n d P l a y M a p p i n g (default value) or A l t e r n a t e C H S

S C S I P l u g a n d P l a y M a p p i n g

M a p p i n g.

M a p p i n g

SCSI Plug and Play Mapping automatically determines the most

efficient and compatible mapping.

Alternate CHS Mapping uses an alternate, possibly less efficient

mapping that may be required if a device is moved between adapters

from different vendors.

These options has no effect after a disk has been partitioned using the

FDISK command. To change the CHS Mapping on a partitioned disk, use

FDISK command to delete all partitions, then reboot the system to clear

memory. If not, the old partitioning data will be reused, thus nullifying

the previous operation.

Ensure that the correct disk is the target of an FDISK command.

A S U S K 8 N - D R E

A l t e r n a t e C H S

5 - 1 7

Table of Contents